自動上料攪拌機在一些建筑施工過程中是比較常見的一種機械車輛設備，通過在我們操作設備的過程中有一些需要注意的事項。那么今天就讓我們共同來了解一下自動上料攪拌機在卸料過程中的注意事項吧。

The automatic feeding mixer is a kind of mechanical vehicle equipment that is common in some construction processes. There are some matters needing attention in the process of operating the equipment. Today, let's take a look at the precautions of the automatic feeding mixer in the unloading process.

1、卸料前讓攪拌罐全速運轉一兩分鐘，讓混凝土充分攪拌，必要時可以加一些水，讓混凝土攪拌得更均勻，也方便卸料。

1. Before unloading, let the mixing tank run at full speed for a minute or two to fully mix the concrete. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.

2、放料時把車盡量停在平地上放料前先把出料斗溜槽打濕，方便清洗。

2. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.

3、放料時好自己看著，免得放料工亂操作放料操作桿，每次罐子正反轉中間位子時好停一下，保護減速機，托輪等。

3. Keep an eye on yourself when discharging, so as to prevent the discharging operator from operating the discharging lever at random. Stop every time when the tank is in the middle of the forward and reverse direction, and protect the reducer, supporting wheel, etc.

4、洗罐子時一定要仔細的沖洗干凈，并把水反復的正反轉兩次，再放出來，后一趟時把水箱的水全部放進罐子，再回到站加水清洗罐子。

4. When washing the tank, be sure to wash it carefully, and repeat the positive and negative rotation of the water twice, and then release it. In the next trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.

在我們操作使用自動上料攪拌機設備的過程中，為了能夠保證設備的良好操作性能，希望大家一定要對這些該注意的事項有所了解才行，避免在操作過程中因對設備不了解而出現操作失誤，影響正常的施工流程進度。關注我們http://www.tywlkj.cn，了解更多相關內容！

In the process of using the automatic feeding mixer, in order to ensure the good operation performance of the equipment, we hope that you must understand these precautions, so as to avoid operating errors due to ignorance of the equipment during the operation, which will affect the normal construction process. Follow us http://www.tywlkj.cn , learn more about it!